Built to Order
Join our mailing list!
(Your shopping cart is empty)
UPS-PL1224-18 - UPS Pro 24V, 18Ah Batt, 24V POE
Polycarbonate Enclosure, 12V 18Ah Batt, 24V POE, Solar Ready. 24hr backup @ 7W
Protects sensitive electronics from damaging power line surges
Provides 24hour battery backup @ 3.5 W load or 12 hours @7W load per 9Ah battery
Powered Over CAT5 Ethernet cable
Several POE voltages available (12V, 18V, 24V and 48VDC)
The UPS Pro™ series outdoor enclosures are designed for applications that require a backup power source in order to maintain uninterrupted service to customers. The enclosure is powered over a CAT5 network cable via Power Over Ethernet (POE) using a POE Supply/Inserter (included). Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid AGM batteries. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas.
Customer electronics operate from battery power so they are isolated from damaging power line surges. The batteries are continuously charged via the POE input and/or solar power. The controller has a secondary wire terminal output which equals the battery voltage for connecting multiple pieces of equipment to the battery power, in addition to the POE output.
There is a generous amount of space reserved inside the enclosures for customer electronics such as controllers, wireless AP or CPE cards, sensors, inverters, etc. Most models are equipped with a Solar Ready controller so they can also be powered using solar panels in addition to or instead of the POE power supply.
Multiple configurations are available for 12V or 24V systems with various battery storage capacities and POE output voltages.
A typical 250mW wireless access point with average power consumption of 3.5W will run 26 hours on a 9AH battery at room temperature or 17 hours at -20 deg C.
Wireless Base Stations and Clients
Wireless Bridge and Repeaters
Mission critical outdoor power
Backup Power Systems
Weatherproof Nema 4X / IP65, UV resistant, outdoor enclosures
Powered over CAT5 cable using POE and/or Solar
Solar Assist. models with integrated solar panels
Generous interior space for customer electronics
Wall or Pole Mounting
Isolates Customer Equipment from Power Line Surges
High Quality AGM VR Sealed Lead Acid Batteries
Advanced battery charge controller protects against overcharge and over discharge
POESETv2---PassivePoE Set V2 - 5,5x2,1 (standard)
POE-12i-POE Input 90-264VAC, Out 12VDC at 1.3A
VPDU Web-Controlled Vertical Power Strip PDU
TPBAT12-9 - 12V 9Ah Valve Regulated Sealed Battery
PoE-48i----POE Input 90-264VAC, Out 48VDC at 0.35A
Share your knowledge of this product with other customers...
Be the first to write a review
Browse for more products in the same category as this item:
Link Technologies, Inc
Become an Affiliate
Send Us Feedback